Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Hot Press PM-1606
Author:
S.D.T. / KM
INSTALLATION
Edition: 02/2005
Page
C-8
Replaces: 01/2002
C.5
Storage
IMPORTANT
The hot-pressing device must be stored in a dry room free from seepage of liquids.
NOTE
Never, on any account, store the hot-pressing device out of doors! As a general rule, observe the
following environmental conditions.
T
ABLE
15
-
S
TORAGE CONDITIONS
Environmental conditions for storage
Min/Max ambient temperature of storage
In the range of +5 °C to +40 °C
Relative humidity of place of storage
In the range of 50% to 70%
If the hot-pressing device, its accessories and spares have to remain in storage for a prolonged period,
they must be protected from dust and damp.
We recommend the following:
Clean the hot-pressing device in general.
Apply PROTECTIVE SILICONE OIL to
un
-painted or
un
-treated parts.
Cover the hot-pressing device with a sheet to protect it from dust.
Before being oiled or greased for good preservation, some parts can, if necessary, be cleaned with a
specific, rustproofing detergent.
Hot-pressing device PM-1606
