Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Hot Press PM-1606
Author: S.D.T.
/KM
REGULATIONS AND GENERAL WARNING NOTES
Edition: 02/2005
Page
A-11
Replaces: 01/2002
A.7
Remaining risks
The use of the hot-pressing device during its operation may give risk to additional risks such as the
following:
The possibility of crushing occurring during press closing.
The possibility of burns occurring in the pressing area if the temperature is not first checked or if suitably
protective gloves are not worn.
The possibility of scalding or burning occurring by hot liquid or steam in the cooling circuit if the cooling
cycle is incorrectly stopped without paying attention to the warnings given in this manual.
The possibility of contact between water and live equipment.
The user is responsible for taking care during transportation and movement of the equipment where the
use of extraneous equipment (such as forklift trucks etc.) present dangers from bumping into and
crushing persons in the area of these operations.
Ensure during equipping and maintenance operations that the stages in the chapters of the manual are
scrupulously adhered to and have these operations carried out only by suitably prepared and qualified
persons.
Hot-pressing device PM-1606
