Habasit BTM-1, Operating Instructions Manual, Page: 5 / 20

Operating instructions – Belt tension meter BTM-1
Version 1.0
5
Caution
For connecting the Belt Tension Meter to a PC, only use the
special BG 810000 cable. If a normal RS232 cable is used, the
instrument can be damaged.
Notes on batteries/rechargeable batteries
If the instrument is not to be used for a long period of time, then the battery
/rechargeable battery must be removed. Otherwise, there is a risk of
discharging or ruining the battery/rechargeable battery, and consequently
damaging the instrument.
Caution
Regular batteries must not be recharged, heated, or disposed of
in an open flame (
explosion hazard !).
Note
Please contribute to the protection of the environment.
Discharged batteries and rechargeable batteries should not be
disposed of along with household waste. They can be taken to
collection sites for used batteries or special waste.
Find out where these sites are located.
At the end of its service life, this product must not
be disposed of along with normal waste but must
be taken to a collection site for the recycling of
electrical and electronic devices.
The materials can be reused according to how they
are labelled. By recycling, reusing the materials or
other forms of reusing old equipment, you will
make an important contribution to the protection of
our environment.