8
USER MANUAL
PURE SINE WAVE INVERTER 300W-600W
4.2
MOUNTING THE INVERTER.
Hold de inverter against the installation location and mark the fastening points.
Then, attach the inverter using your chosen fastening method.
Fig. 2
5.
CONNECTING THE INVERTER.
5.1
GENERAL REQUIREMENTS.
When installed in vehicles or boats, the inverter must be connected to the
chassis or earth.
Never use the inverter on vehicles where the positive terminal of the battery
is connected to the chassis.
When setting up a socket distribution circuit (mains setup), comply with the
applicable regulations.
Only use copper cables.
Keep the cables as short as possible.
Make sure to install a fuse on the positive cable, otherwise the cables can
overload which might result in a fire.
o
4403405: 30A fuse
o
4403415: 60A fuse
The inverter may only be connected by qualified persons. Please, make sure
that the connection is made following the wiring diagram.
Fastening holes M5
