G-code, M-code, and Setting
Page 1 of 3 pages
Page 1: ...G code M code and Setting Page 1 of 3 pages ...
Page 2: ...o use the probe arm must be lowered Then the tool tip jogged into place about 0 25 in from the corner of the problem that corresponds to the desired tip direction The code will either use the current tool offset if one has been called previously or the tool offset may be chosen using a T code The cycle will probe the tool enter the offset and return the tool to the start position Using G212 Auto T...
Page 3: ... touching off any back working tools to keep from hitting the spindle or the back wall of the machine A tool and offset must be called Tnnn before running G212 or an alarm will be generated G code M code and Setting Page 3 of 3 pages ...
