Haas Automation UMC-1000, Operator'S Manual Supplement

Page: 37 / 70

Introduction
19
Chapter 2: Introduction
2.1 Overview
This operator’s manual supplement describes the unique features and functions of the
UMC series of machines. Refer to your Mill Operator’s Manual for control operation,
programming, and other general mill information.
You can find specific details about the UMC family, including information that is beyond the
scope of this document, at www.HaasCNC.com.
2.2 UMC-1000 Workstations
F2.1: This diagram illustrates the UMC-1000 three operator zones.
• A: Operator Station.
• B: Check and Maintain Chip Conveyor.
• C: Check and Maintain Coolant, Coolant Pumps and Lubricants.
A
B
C