Haag-Streit C.MOR HD, Instructions For Use Manual, Page: 33 / 44

Haag-Streit AG Operation of C.MOR HD and C.MOR HD³ | 7
1500 4000089 02010_web 33
The AE function is only enabled, if the function
Gain Control
is set to
AUTO
:
4. Select the menu item
AE mode
.
5. Set the value
Gain Control
to
AUTO
.
6. If the button [PAINT/AE] lights up green, press the button again to deactivate the hue adjust-
ment.
ð
The button [PAINT/AE] is not lit.
7. Adjust the automatic exposure via the control buttons:
– Press the upper or the right control button to increase the AE level.
– Press the lower or the left button to decrease the AE level.
8. Confirm the entry by pressing the button [FUNCTION/SET] on the front panel of the CCU.
9. To activate the menu lock, set the value of the menu item
Menu Lock
to
ON
.
7.7 Adjust Image and Monitor Settings (BARS)
C.MOR HD and C.MOR HD³ can output a color bar test pattern, so that image and monitor settings
(e.g., contrast, brightness) can be adjusted easier.
1. Press the button [BARS] on the front panel of the CCU to show or hide the color bar test pat-
tern.
ð If the button [BARS] lights up green, the color bar test pattern is shown.
ð
If the button [BARS] is not lit, the color bar test pattern is hidden.
7.8 Create Freeze Images (FREEZE/REC)
C.MOR HD and HD³ can output freeze images.
1. Select the image section to be captured.
2. Press the button [FREEZE/REC] on the front panel of the CCU to freeze the image.
3. To return to the moving image, press the button [FREEZE/REC] again.
ð If the button [FREEZE/REC] lights up green, the freeze image function is activated.
ð
If the button [FREEZE/REC] is not lit, the freeze image function is deactivated.
7.9 Open User Profiles (SCENE)
C.MOR HD and C.MOR HD³ can store up to four scene files to access frequently used settings
quickly. To save scene files, see
Configure User Profiles (Scene Files) [
}
30] .
1. Press the button [SCENE] on the front panel of the CCU.
ð
The button [SCENE] lights up green and the scene selection is active.
2. Select the desired scene file via the control buttons:
– Press the upper control button to load scene file 1.
– Press the right control button to load scene file 2.
– Press the lower control button to load scene file 3.
– Press the left control button to load scene file 4.