7 | Operation of C.MOR HD and C.MOR HD³
Haag-Streit AG
32
1500 4000089 02010_web
7.5 Adjust Light Sensitivity (GAIN)
C.MOR HD and C.MOR HD³ can automatically adjust the brightness of the camera image via gain
function. The gain of a camera provides a light amplification. Despite changing lighting conditions,
the camera image is displayed with almost constant brightness.
Notice that excessive gain may cause white spots in the video image.
1. Press the button [GAIN] on the front panel of the CCU to switch the automatic gain control on
or off.
ð
If the button [GAIN] lights up green, the automatic gain control is activated.
ð
If the button [GAIN] is not lit, the automatic gain control is deactivated.
7.6 Adjust Hue and Automatic Exposure (PAINT/AE)
Adjust red and blue component
After the performing of a white balance, the red and the blue component of the camera image can
be adjusted manually to obtain the desired hue.
Notice that the settings are only temporary and will be reset if the CCU is switched off.
1. Press the button [PAINT/AE] on the front panel of the CCU to activate the hue adjustment.
ð
The button [PAINT/AE] lights up green and the hue adjustment is active.
2. Adjust the hue via the control buttons:
–
Press the upper control button to increase the red component of the video image.
–
Press the right control button to increase the blue component of the video image.
–
Press the lower control button to decrease the red component of the video image.
–
Press the left control button to decrease the blue component of the video image
3. Confirm the setting by pressing the button [FUNCTION/SET].
Adjust automatic exposure
The
function adjusts the shutter speed and the gain value according to the exposure level. This
allows to increase or decrease the brightness of the image.
Notice that the settings are only temporary and will be reset if the CCU is switched off.
To change settings in the setup menu, the menu lock must be deactivated:
1. Open the
Setup Menu
.
2. Select the menu item
Miscellaneous
.
3. Set the value of the menu item
Menu Lock
to
OFF
.
ð
The red lock mark in the menu screen disappears.