8
Installing a power supply
1.
Remove the filler panel from the power supply slot.
Figure2-14 Removing the filler panel from the power supply slot
2.
Push the power supply into the slot until it snaps into place.
Figure2-15 Installing the power supply
Connecting external cables
Cabling guidelines
WARNING!
To avoid electric shock, fire, or damage to the equipment, do not connect communication equipment
to RJ-45 Ethernet ports on the device.
•
For heat dissipation, make sure no cables block the inlet or outlet air vents of the device.
•
To easily identify ports and connect/disconnect cables, make sure the cables do not cross.
•
Label the cables for easy identification of the cables.
•
Wrap unused cables onto an appropriate position on the rack.
