2-11
Adjusting the AP angle
After the AP is installed, you can adjust the AP angle by loosening the four screws that secure the
AP bracket and wall/pole bracket.
•
If the AP is installed with the vertical pole mounting arrow on the AP bracket pointing up, you
can adjust the AP to the desired elevation angle (the adjustment angle must not exceed 60
degrees).
•
If the AP is installed with the horizontal pole mounting arrow on the AP bracket pointing up, you
can adjust the AP to the desired azimuth angle (the adjustment angle must not exceed 60
degrees).
Figure2-17 Adjusting the AP angle on a vertical pole
