4-2
Port
Standards and
protocols
Description
100/1000/2500M Ethernet
copper port (2.5GE/PoE+)
•
IEEE802.3
•
IEEE802.3u
•
IEEE802.3af
•
IEEE802.3at
Used for connecting the AP to an uplink device for
Internet or MAN access. It can also receive PoE+
power from the uplink device.
It is represented by interface number SGE1/0/1 in
the MAP file and smartrate-ethernet 1 for
configuration on the AC.
Power port (54 V)
N/A
Used for rec54 VDC power from the local
power source.
LEDs
Table4-2 LED descriptions
LED Status
Description
Off
No power is present or the LED has been turned off
from the CLI.
Yellow
Steady on
The AP is initializing, or an initialization exception
has occurred.
Flashing at 1 Hz
No radio cards have been detected.
Flashing at 2 Hz
The Ethernet interfaces are down and no mesh links
are established.
Green
Steady on
The AP has registered to an AC, but does not have
any associated clients.
Flashing at 0.5 Hz
The AP has started up but has not registered to any
AC.
Flashing at 1 Hz
Only the 2.4G radio has associated clients.
Flashing at 2 Hz
The AP is upgrading the image.
Blue
Flashing at 1 Hz
Only the 5G radio has associated clients.
Alternating between green and blue at
1 Hz
Both the 2.4G and 5G radios have associated
clients.
