2-2
Determining the installation position
Determine the installation position by observing the following principles:
•
Few obstacles such as wall exist between the AP and clients.
•
The AP is far away from electronic devices (such as microwave oven) that might generate
radio frequency (RF) noise.
•
The AP does not hinder people’s daily work and life.
•
The place is not water seeping, water soaking, and condensing.
Mounting the AP
IMPORTANT:
•
Before mounting the AP on a wall or ceiling, connect cables to the AP.
•
Install an M3 × 23.5 security screw as required.
The AP can be installed only indoors. You can mount the AP on a wall or a ceiling.
Mounting bracket
Figure 2-2 Mounting bracket
(1) Installation hole for securing the mounting bracket to a wall or ceiling (point A)
(2) T-rail installation hole (reserved) (Point B)
(3) Auxiliary hole for securing cables by using cable tie (point C)
(4) Security hole for an M3 × 23.5 security screw
Mounting the AP on a wall
1.
Place the mounting bracket against the wall and mark the installation holes on the wall.
