3
Logging in from the Web interface
By default, HTTP and HTTPS are enabled and the following login information is defined for your
login:
•
Username
—admin.
•
Password
—h3capadmin.
Cloud mode
The configuration terminal must be enabled with DHCP.
Some Intel wireless adapters do not support 802.11ax. For clients to detect Wi-Fi 6 networks,
upgrade the driver for the wireless adapter to the most recent version. For more information, see
the official statement of Intel
To log in to the AP through a wireless connection:
1.
Enable WLAN on the configuration terminal and access WLAN
H3C_xxxxxx
, where
xxxxxx
is
the last six bits of the AP's MAC address.
2.
Visit
http://wlan.h3c.com
from a browser, and then press
Enter
.
Visit
http://myap.h3c.com
from a browser for a configuration terminal in a version earlier than
2448P10.
3.
Enter the default username and password. For security purposes, change the password as
prompted after you access the Web interface, and then click
OK
.
Anchor ACmode
When the AP operates in anchor AC mode, only wired connections are available.
Open a Web browser and visit 192.168.0.50 to log in to the device. If the device IP address has
been changed, contact your network administrator obtain the most recent configuration.
