4
Installing the AP
Figure 1
Installation flowchart
Check before installation
Before installing an AP, perform the following tasks:
•
Connect the AP to the power supply and the network. Examine the LEDs to verify that the AP can
operate correctly. For more information about AP LEDs, see “
.”
•
Verify that cabling on the installation site has been completed.
•
To ensure the PoE performance, H3C recommends that you use GE interfaces for PoE power supply.
•
Record the AP MAC address and serial number marked on the rear of the AP for future use.
Installing the AP
1.
Use the M3.5 × 25 screws to secure the wall-mounting bracket to the terminal box.
