10
Figure 3
Screw hole locations and screw hole size (in mm)
2.
Insert the pointed end of anchors into the drilled holes and tap the flat end of anchors
with a rubber hammer until they are flush with the wall surface.
3.
Align the holes in the wall-mounting bracket with the anchors and insert screws through
the installation holes into the anchors (see Figure 4 Position the bracket so that arrow
points up.
4.
Adjust the position of the wall-mounting bracket and tighten the screws.
49.0
44.6
22.3
49.1
49.1
150.0
75.0
62.9
104.0
