10-22
Description
Use the
wlan broadcast-probe reply
command to enable the AP to respond to the probe requests with
SSID null sent by the client.
Use the
undo wlan broadcast-probe reply
command to remove the configuration. In other words, the
AP responds only to probe requests that carry the specified SSID.
By default, an AP responds to probe requests with SSID null sent by the client.
Examples
# Enable the AP to respond to probe requests with SSID null sent by the client.
<Sysname> system-view
[Sysname] wlan broadcast-probe reply
wlan client idle-timeout
Syntax
wlan client idle-timeout
interval
undo wlan client idle-timeout
View
System view
Default Level
2: System level
Parameters
interval
: Specifies the time for which the link between AP and client ( power-save or awake ) can be idle.
The value ranges from 60 to 86400 seconds.
Description
Use the
wlan client idle-timeout
command to specify the idle time functionality.
Use the
undo wlan client idle-timeout
command to restore the default.
By default, client idle timeout is 3600 seconds..
If the client is idle for more than the specified interval, that is if the AP does not receive any data from the
client within a specified interval, the client will be removed from the network.
Examples
# Specify the client idle time as 600 seconds.
<Sysname> system-view
[Sysname] wlan client idle-timeout 600
wlan client keep-alive
Syntax
wlan client keep-alive
interval
undo wlan client keep-alive
View
System view
