10-19
Parameters
disable
: Disables the service template.
enable
: Enables the service template.
Description
Use the
service-template enable
command to enable the service template.
Use the
service-template disable
command to disable the service template.
By default, the service-template is disabled.
Examples
# Enable the service template
1.
<Sysname> system-view
[Syaname] wlan service-template 1 clear
[Syaname-wlan-st-1] ssid ssid-1
[Syaname-wlan-st-1] authentication-method open-system
[Syaname-wlan-st-1] service-template enable
short-gi enable
Syntax
short-gi enable
undo short-gi enable
View
WLAN radio interface view
Default Level
2: System level
Parameters
None
Description
Use the
short-gi enable
command to enable the short GI function.
Use the
undo short-gi enable
command to disable the short GI function.
By default, the short GI function is enabled.
This command is only effective on 802.11n radios.
If you change the radio type of an 802.11n radio, the default setting for this function of the new radio
type will be restored.
Delays may occur during receiving radio signals due to factors like multi-path reception. Therefore, a
subsequently sent frame may interfere with a previously sent frame. The GI function is used to avoid
such interference. It increases the data speed by 10 percent.
The short GI function is independent of bandwidth and thus supports both 20 MHz and 40 MHz
bandwidths.
Examples
# Disable the short GI function.
<sysname> system-view
