10-17
When this command is used, the AP sends the de-authentication frame to the client and the client is
removed from the WLAN service.
Examples
# Cut off the client with MAC address 0102-0304-0506.
<Sysname> reset wlan client mac-address 0102-0304-0506
reset wlan statistics
Syntax
reset wlan statistics
client
{
all
|
mac-address mac-address
}
View
User view
Default Level
2: System level
Parameters
all
: Resets the statistics of all clients.
mac-address
: Specifies the MAC address of the clients.
Description
Use the
reset wlan statistics
command to reset the statistics of specified client, or all clients.
Examples
# Reset the corresponding radio statistics of all clients.
<Sysname> reset wlan statistics client all
rts-threshold
Syntax
rts-threshold size
undo rts-threshold
View
WLAN radio interface view
Default Level
2: System level
Parameters
size
: Specifies the maximum frame length required by the RTS method. The value ranges from 0 to
2346 bytes.
Description
Use the
rts-threshold
command to specify the request to send (RTS) threshold length. Use the
undo
rts-threshold
command to restore the default value.
By default, the rts-threshold is 2346 bytes.
If the frame length is beyond this value, the RTS mechanism will be used.
