10-14
By default, the long retry threshold is 4.
Examples
# Set the long-retry threshold to 10.
<Sysname> system-view
[Sysname] interface wlan-radio 1/0/1
[Sysname-WLAN-Radio1/0/1] long-retry threshold 10
max-power
Syntax
max-power
radio-power
undo max-power
View
WLAN radio interface view
Default Level
2: System level
Parameters
radio-power
: Maximum radio power. The value range depends on the country code and radio mode.
Description
Use the
max-power
command to configure the maximum transmission power on the radio.
Use the
undo max-power
command to restore the default.
By default, the maximum radio power varies with country codes, channels, AP models, radio types and
antenna types. If 802.11n is adopted, the maximum radio power also depends on the bandwidth mode.
Related commands:
wlan country-code
and
radio type
Examples
# Specify the radio max power to 5.
<Sysname> system-view
[Sysname] interface wlan-radio 1/0/1
[Sysname-WLAN-Radio1/0/1] radio-type 11b
[Sysname-WLAN-Radio1/0/1] max-power 5
max-rx-duration
Syntax
max-rx-duration
interval
undo max-rx-duration
View
WLAN radio interface view
Default Level
2: System level
