10-13
fragment-threshold
Syntax
fragment-threshold size
undo fragment-threshold
View
WLAN radio interface view
Default Level
2: System level
Parameters
size
: Specifies the maximum length of the frame without fragmentation. The value ranges from 256 to
2346 bytes and must be an even number.
Description
Use the
fragment-threshold
command to specify the maximum length of packet that can be
transmitted without fragmentation.
Use the
undo fragment-threshold
command to restore the default.
By default, the fragment threshold is 2346 bytes.
When the actual packet size exceeds the specified fragment threshold value, the packets are
fragmented.
Examples
# Specify the maximum frame length as 2048 bytes.
<Sysname> system-view
[Sysname] interface wlan-radio 1/0/1
[Sysname-WLAN-Radio1/0/1] fragment-threshold 2048
long-retry threshold
Syntax
long-retry threshold count
undo long-retry threshold
View
WLAN radio interface view
Default Level
2: System level
Parameters
count
: Number of retry times AP can send a long unicast frame with a size larger than the Request to
Send (RTS) threshold. The value ranges from 1 to 15.
Description
Use the
long-retry threshold
command to set the number of re-transmission attempts for frames
larger than the RTS threshold.
Use the
undo long-retry threshold
command to restore the default.
