9-3
Parameters
mesh-profile-number
: Mesh profile number, which ranges from 1 to 32.
all
: All mesh profiles.
Description
Use the
display wlan mesh-profile
command to display mesh profile information.
Examples
# Display the mesh profile information of mesh profile 1.
<Sysname> display wlan mesh-profile 1
Mesh Profile Parameters
--------------------------------------------------------------------------
Mesh Profile Number : 1
Mesh ID : sys_mesh
Binding Interface : WLAN-MESH1
MKD Service : Enable
Link Keep Alive Interval (s) : 2 (Default)
Link Backhaul Rate (Mbps) : 18 (Default)
Mesh Profile Status : Enable
--------------------------------------------------------------------------
Table 9-2 display wlan mesh-profile
command output description
Field
Description
Mesh Profile Number
Mesh profile number
Mesh ID
Mesh ID of the mesh profile
Binding Interface
Mesh interface bound to the mesh profile
MKD Service
Whether the mesh profile has mesh key domain service enabled or not
Link Keep Alive Interval
Keep-alive interval to be used by devices bound to the mesh profile
Link Backhaul Rate
Backhaul rate to be used by devices bound to the mesh profile
Mesh Profile Status
Mesh profile status, enabled or disabled
display wlan mp-policy
Syntax
display wlan mp-policy
{
mp-policy-name
|
all
}
View
Any view
Default Level
2: System level
Parameters
mp-policy-name
: MP policy name, a string of 1 to 15 alphanumeric characters with underscores. It
should not have any space characters.
all
: All MP policies.
