9-1
z
The models listed in this document are not applicable to all regions. Please consult your local sales
office for the models applicable to your region.
z
Support of the H3C WA series WLAN access points (APs) for commands may vary by AP model.
For more information, see
Feature Matrix
.
z
The interface types and the number of interfaces vary by AP model.
9
WDS Configuration Commands
bind wlan-mesh
Syntax
bind wlan-mesh
interface-index
undo bind wlan-mesh
View
Mesh profile view
Default Level
2: System level
Parameters
interface-index
: Index of the WLAN mesh interface, which ranges from 1 to 32.
Description
Use the
bind wlan-mesh
command to bind the specified mesh interface to the mesh profile.
Use the
undo bind wlan-mesh
command to unbind the interface to the mesh profile.
By default, no mesh interface is bound to the mesh profile.
One mesh interface can be bound to only one mesh profile.
Examples
# Bind interface WLAN-mesh 1 to mesh profile 1.
<Sysname> system-view
[Sysname] wlan mesh-profile 1
[Sysname-wlan-mshp-1] bind wlan-mesh 1
display wlan mesh-link
Syntax
display wlan mesh-link
{
mesh-profile mesh-profile-number
|
radio radio-number
|
peer-mac-address mac-address
|
all
}
