H3C UniServer R6900 G3, Installation, Quick Start, Page: 8 / 15

2
Figure 1 Releasing the CMOD
b. As shown by callout 1 in Figure 2 , press forward the locking levers to disengage the CMOD
from the server. Then pull the CMOD out of the server, as shown by callout 2 in Figure 2 .
Figure 2 Removing a CMOD
6. Remove the CMOD access panel.
a. As shown by callout 1 in Figure 3 , simultaneously press the two release buttons on the
access panel and slide the access panel a little towards the rear.
b. As shown by callout 2 in Figure 3 , lift the access panel away from the CMOD.