7-10
Figure 7-11 SAS/SATA drives connected to the standard storage controllers in PCIe slots 1
and 7)
(1) SAS/SATA data cables to storage controller in PCIe slot 7
(2) SAS/SATA data cable to storage controller in PCIe slot 1
NOTE:
For the cables connecting PCIe slot 7, connect the data cable marked with C0 and C1 at the storage
controller end to the drive backplane for drive cage bay 1. Connect the data cable marked with C2
and C3 at the storage controller end to the drive backplane for drive cage bay 2. For information
about the locations of drive cage bays, see "Front panel view."
Connecting AUX signal cables and power cords
(1), (3), and (5) AUX signal cables
(2), (4), and (6) Power cords
