H3C UniServer BT716F, User Manual

Page: 18 / 44

2-9
Figure 2-6 Connections between straight-through modules and blade server Mezz NICs (2)
2.5.2 Internal Connections Between Straight-Through Modules and Blade Server Mezz
NICs
When configuring the Mezz NIC of the blade server, you need to specify the connection between
the Mezz NIC port and the straight-through module. For details, contact Technical Support.
2.5.3 Internal Connection Between the Direct Module Interface and the Blade Server
Table 2-5 shows the connections between external interfaces of the straight-through module and
the blade servers.
Mezz1
Mezz2
Mezz3
Mezz4
Mezz5
Mezz6
1
4
2
3
5
6
1
2
LOM P1
LOM P2
Blade ICM
Mid-plane
OM
Embedded