50
Figure 85 Deleting a RAID array
Uninitializing drives
IMPORTANT:
When the storage controller operating mode is
HBA
, you cannot uninitialize drives. To uninitialize
these drives, you must first set the storage controller operating mode to
RAID: hide RAW
,
RAID:
expose RAW
,
Auto Volume
, or
Simple Volume
.
Perform this task to clear data, Adaptec metadata, and reserved space on drives, and remove the
system partitions. After a drive in Ready state is uninitialized, it returns to the raw state.
To uninitialize drives:
1.
On the PMC RAID management screen, select
Logical Device Configuration
, and press
Enter
.
2.
On the screen as shown in
, select
Uninitialize Drives
, and press
Enter
.
Summary of Contents for UniServer B5700 G3
