53
Figure 70 Installing the riser card
7.
Connect PCIe module cables, if any.
8.
Install the access panel. For more information, see "
."
9.
Rack-mount the server. For more information, see "
10.
Connect the power cord. For more information, see "
11.
Power on the server. For more information, see "
Installing a UIS-RC-FHHL-2U-G3-F riser card and a PCIe
module
1.
Power off the server. For more information, see "
2.
Remove the server from the rack. For more information, see "
Removing the server from a rack
."
3.
Remove the access panel. For more information, see "
."
4.
Lift the riser card blank to remove it from PCIe riser connector 3, as shown in