8
Table 2 AC/DC adapter specifications
Item Specification
Input
100 VAC to 240 VAC
Output
+54V
@ 1.67 A
Figure 13 Connecting a local power source
Check after power-on
After the AP is powered on, examine the LEDs to verify that the AP is operating correctly. For
information about AP LEDs, see "
Connecting the AP to an IoT module
An IoT port can connect only to IoT devices if power supply is enabled for the port.
Use a straight-through or crossover Category 5e Ethernet cable or above to connect the AP to a
T300M-X. As a best practice, use a straight-through cable. Use an 8P8C RJ-45 connector for the
cable.
