H3C SR6608/6604 Routers Installation Manual
Chapter 7 Maintaining Software
7-43
You can clear the super password by selecting
8
on the main menu.
========================<EXTEND-BootWare MENU>========================
|<1> Boot System |
|<2> Enter Serial SubMenuSub-menu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Modify BootWare Password |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
======================================================================
Enter your choice(0-9):8
The system displays the following information indicating that you have successfully
cleared the super password.
Clear Application Password Success
Note:
z
After you clear the super password, quit the menu and reboot the router, you can
enter system view directly.
z
This setting (super password clearing) is valid only for the first reboot of the router.
The super password will be restored after a second reboot.
7.8 Backing Up and Restoring BootWare
You can back up and restore BootWare on the BootWare operation sub-menu.
Select
7
on the main menu to enter the BootWare operation sub-menu. Refer to section
7.2.5 “BootWare Operation Sub-menu” on page 7-12 for details.
7.8.1 Backing Up the Entire BootWare
To back up the entire BootWare, you need to back up the basic segment and then the
extended segment of the BootWare .
Select
1
on the BootWare operation sub-menu, and the system prompts:
Will you backup the Basic BootWare? [Y/N]
Enter
Y
:
Begin to backup the Basic BootWare....................Done!
