80
Solution
To resolve the issue:
1.
Verify the output (such as the system temperature and PCB voltage alarms) on the serial
terminal and the software management tool.
2.
If the issue persists, contact H3C Support.
FIP module failures
RUN LED is off
Symptom
The RUN LED on the FIP module is off.
Solution
To resolve the issue:
1.
Verify that the router is powered on.
2.
Verify that the FIP module is installed in a right slot.
3.
Execute the
display version
command to display system version information:
Slot3:
The Board is present, state is unknown
4.
If the issue persists, contact H3C Support.
RUN LED fast flashes
Symptom
20 minutes after the router is powered on or the FIP module is plugged into the router, the RUN LED
on the FIP module still fast flashes at 8 Hz.
Solution
To resolve the issue:
1.
Execute the
display version
command to display system version information.
Slot3:
The Board is present, state is unknown
The output shows that the FIP module is in position.
2.
If the issue persists, contact H3C Support.
Power module failures
Power LED is off
Symptom
The router cannot be powered on and the power LED on the front panel is off.
Solution
To resolve the issue:
1.
Verify that the power switch is turned on.