149
Step Command
Remarks
1.
Verify that the MDC
you are specifying
has clock sources in
normal state.
display network-clock source
This command is available in any view.
2.
Enter system view.
system view
N/A
3.
Enable the clock
reference manually
specified on a
non-default MDC.
•
In standalone mode:
network-clock work-mode manual
mdc
mdc-id
•
In IRF mode:
network-clock chassis
chassis-number
work-mode manual
mdc
mdc-id
By default, the clock reference specified
on the default MDC takes effect.
Displaying and maintaining network clock
monitoring module configuration
Execute
display
commands in any view.
Task Command
Display the self-test result of the network clock
monitoring module (in standalone mode).
display network-clock self-test-result
Display the self-test result of the network clock
monitoring module (in IRF mode).
display network-clock self-test-result
[
chassis
chassis-number
]
Display the operating state of the network
clock monitoring module (in standalone
mode).
display network-clock status
Display the operating state of the network
clock monitoring module (in IRF mode).
display network-clock status
[
chassis
chassis-number
]
Display the states of clock sources (in
standalone mode).
display network-clock source
Display the states of clock sources (in IRF
mode).
display network-clock source
[
chassis
chassis-number
]
Display version information for the network
clock monitoring module (in standalone
mode).
display network-clock version
Display version information for the network
clock monitoring module (in IRF mode).
display network-clock version
[
chassis
chassis-number
]
