1-4
To know which commands are supported in a certain view, enter
?
in this view. Then the system
displays all the commands that can be executed in this view.
Figure 1-3
Command line views
……
Entering System View
When you log in to the device, you automatically enter user view, where <Device name> is displayed.
You can perform limited operations in user view, such as display operations, file operations, and Telnet
operations. To perform further configurations for the device, enter system view.
Follow the step below to enter system view:
To do…
Use the command…
Remarks
Enter system view from user view
system-view
Required
Available in user view
Exiting the Current View
The CLI is divided into different command views. Each view has a set of specific commands and defines
the effective scope of the commands. The commands available to you at any given time depend on the
view you are in.
Follow the step below to exit the current view:
Summary of Contents for SR6600 SPE-FWM
Page 112: ...6 101...
