16
5.
If the packets are discarded after being sent to the CPU, contact H3C Support.
6.
Execute the
bcm
slot
chip
l3/defip/show
command in probe view to determine whether the
routing entries are correct and whether the packets match the routing entries. If not, contact
H3C Support
7.
If the problem persists, contact H3C Support.
Packet loss in data forwarding
Symptom
Packet loss occurs in data forwarding.
Solution
To resolve the problem, see "
Related commands
This section lists the commands that you might use for troubleshooting SAP modules.
Command
Description
bcm
slot
chip
l3/defip/show
Displays information about routing entries.
bcm
slot
chip
l3/l3table/show
Displays ARP entries.
bcm
slot
chip
show/counter
Displays traffic statistics and data rate for an
interface.
debugging physical packet
[
all
|
input
|
output
]
interface interface-number
Displays information about the packets sent to the
CPU.
display counters
{
inbound
|
outbound
}
interface
Displays traffic statistics on an interface.
display interface
interface-number
Displays information about an interface.
reset counters interface
Clears traffic statistics on an interface.