H3C SOHO IE4300, Command Reference Manual

Page: 908 / 3296

16
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all : Displays the total number of all neighbor entries, including neighbor entries created
dynamically and configured statically.
dynamic : Displays the total number of neighbor entries created dynamically.
static
: Displays the total number of neighbor entries configured statically.
slot slot-number
: Specifies an IRF member device by its member ID. If you do not specify a
member device, this command displays the number of neighbor entries for all member devices.
interface interface-type interface-number
: Specifies an interface by its type and
number.
vlan vlan-id
: Displays the total number of neighbor entries in the specified VLAN. The value
range for VLAN ID is 1 to 4094.
Examples
# Display the total number of neighbor entries created dynamically.
<Sysname> display ipv6 neighbors dynamic count
Total number of dynamic entries: 2
display ipv6 neighbors entry-limit
Use display ipv6 neighbors entry-limit to display the maximum number of ND entries
that a device supports.
Syntax
display ipv6 neighbors entry-limit
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the maximum number of ND entries that the device supports.
<Sysname> display ipv6 neighbors entry-limit
ND entries: 256
display ipv6 neighbors vpn-instance
Use display ipv6 neighbors vpn-instance to display neighbor information about a VPN
instance.
Syntax
display ipv6 neighbors vpn-instance vpn-instance-name [ count ]