H3C SOHO IE4300, Command Reference Manual

Page: 573 / 3296

44
#
return
The output shows that:
•
GigabitEthernet 1/0/1 is removed from VLANs 2 and 3.
•
GigabitEthernet 1/0/1 is a tagged member of VLANs 20 and 30.
•
The port link type and PVID of GigabitEthernet 1/0/1 do not change.
Related commands
port private-vlan host
port private-vlan promiscuous
port private-vlan trunk secondary
private-vlan
(VLAN view)
private-vlan primary
port private-vlan trunk secondary
Use
port private-vlan trunk secondary
to configure a port as a trunk secondary port of
the specified VLANs and assign the port to these VLANs.
Use
undo port private-vlan trunk secondary
to cancel the trunk secondary attribute of
a port in the specified VLANs.
Syntax
port private-vlan vlan-id-list trunk secondary
undo port private-vlan vlan-id-list trunk secondary
Default
A port is not a trunk secondary port of any VLANs.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
vlan-id-list
: Specifies a space-separated list of up to 10 secondary VLAN items. Each item
specifies a secondary VLAN ID or a range of secondary VLAN IDs in the form of vlan-id1 to
vlan-id2 . The value range for secondary VLAN IDs is 1 to 4094. The value for the vlan-id2
argument must be equal to or greater than the value for the
vlan-id1
argument. Though the
system default VLAN (VLAN 1) is in the valid value range, it cannot be configured in the command.
Usage guidelines
If the specified VLANs are secondary VLANs that have been associated with primary VLANs, the
command also assigns the port to the associated primary VLANs. Also, the following events occur:
•
For an access port, the device performs the following operations:

Changes the port link type to hybrid. The PVID of the port does not change.

Assigns the port to the secondary VLANs and the associated primary VLANs as a tagged
member.