H3C SOHO IE4300, Command Reference Manual

Page: 545 / 3296

16
Parameters
vlan-id-list
: Specifies a space-separated list of up to 32 VLAN items. Each item specifies a
VLAN ID or a range of VLAN IDs in the form of vlan-id1 to vlan-id2 . The value range for
VLAN IDs is 1 to 4094. The value for the vlan-id2 argument must be equal to or greater than the
value for the
vlan-id1
argument. The specified VLANs must already exist on the device.
tagged
: Configures the port as a tagged member of the specified VLANs. A tagged member of a
VLAN sends packets from the VLAN without removing VLAN tags.
untagged
: Configures the port as an untagged member of the specified VLANs. An untagged
member of a VLAN sends packets from the VLAN after removing VLAN tags.
Usage guidelines
A hybrid port can allow multiple VLANs. If you execute this command multiple times on a hybrid port,
the hybrid port allows all the specified VLANs.
Examples
# Configure GigabitEthernet 1/0/1 as a hybrid port, and assign it to VLAN 2, VLAN 4, and VLAN 50
through VLAN 100 as a tagged member.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port link-type hybrid
[Sysname-GigabitEthernet1/0/1] port hybrid vlan 2 4 50 to 100 tagged
Related commands
port link-type
port link-type
Use
port link-type
to set the link type of a port.
Use
undo port link-type
to restore the default link type of a port.
Syntax
port link-type { access | hybrid | trunk }
undo port link-type
Default
Each port is an access port.
Views
Layer 2 aggregate interface view
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
access
: Sets the port link type to access.
hybrid
: Sets the port link type to hybrid.
trunk
: Sets the port link type to trunk.
Usage guidelines
To change the link type of a port from trunk to hybrid or vice versa, first set the link type to access.