H3C SOHO IE4300, Command Reference Manual

Page: 543 / 3296

14
port access vlan
Use
port access vlan
to assign an access port to the specified VLAN.
Use
undo port access vlan
to restore the default.
Syntax
port access vlan vlan-id
undo port access vlan
Default
All access ports belong to VLAN 1.
Views
Layer 2 aggregate interface view
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
vlan-id
: Specifies a VLAN by its ID in the range of 1 to 4094.
Usage guidelines
By default, all access ports belong to VLAN 1. Therefore, this command cannot be used to assign
access ports to VLAN 1. To move an access port to VLAN 1, execute the
undo port access
vlan
command on the access port.
Before assigning an access port to a VLAN, make sure the VLAN has been created.
Examples
# Assign GigabitEthernet 1/0/1 to VLAN 3.
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] quit
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port access vlan 3
port hybrid pvid
Use
port hybrid pvid
to set the PVID of a hybrid port.
Use
undo port hybrid pvid
to set the PVID of a hybrid port to 1.
Syntax
port hybrid pvid vlan vlan-id
undo port hybrid pvid
Default
The PVID of a hybrid port is the ID of the VLAN to which the port belongs when its link type is
access
.
Views
Layer 2 aggregate interface view