H3C SOHO IE4300, Command Reference Manual

Page: 510 / 3296

45
undo stp role-restriction
Default
Port role restriction is disabled.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Usage guidelines
When port role restriction is enabled on a port, the port cannot become a root port.
If this command is configured in Layer 2 Ethernet interface view, it takes effect only on that interface.
If this command is configured in Layer 2 aggregate interface view, it takes effect only on the
aggregate interface.
If this command is configured on a member port in an aggregation group, it takes effect only after the
port leaves the aggregation group.
Examples
# Enable port role restriction on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] stp role-restriction
stp root primary
Use
stp root primary
to configure the device as the root bridge.
Use
undo stp root
to restore the default.
Syntax
stp [ instance instance-list | vlan vlan-id-list ] root primary
undo stp [ instance instance-list | vlan vlan-id-list ] root
Default
The device is not a root bridge.
Views
System view
Predefined user roles
network-admin
Parameters
instance instance-list : Specifies a space-separated list of up to 10 MSTI items. Each item
specifies an MSTI or a range of MSTIs in the form of
instance-id1 [ to instance-id2 ]
. The
value for
instance-id2
must be equal to or greater than the value for
instance-id1
. The
value range for the
instance-id
argument is 0 to 4094, and the value 0 represents the CIST.
vlan vlan-id-list
: Specifies a space-separated list of up to 10 VLAN items. Each item
specifies a VLAN or a range of VLANs in the form of
vlan-id1 [ to vlan-id2 ]
. The value for