26
super
Use
super
to obtain another user role without reconnecting to the device.
Syntax
super
[
role-name
]
Views
User view
Predefined user roles
network-admin
Parameters
role-name
: Specifies a user role, a case-sensitive string of 1 to 63 characters. The user role must
exist in the system and cannot be security-audit. If you do not specify a user role, you obtain the
default target user role which is set by using the
super default role
command.
Usage guidelines
The obtained user role is a temporary user role, because this command is effective only on the
current login. The next time you are logged in with the user account, the original user role settings
take effect.
To enable a user to obtain another user role without reconnecting to the device, you must configure
user role authentication.
•
If no local password is configured in the local password authentication (
local
), an AUX user
can obtain the user role by either entering a string or not entering anything.
•
If no local password is configured in the local-then-remote authentication (
local scheme
),
the following rules apply:
A VTY user performs remote authentication.
An AUX user can obtain user role authorization by either entering a string or not entering
anything.
Examples
# Obtain the user role network-operator.
<Sysname> super network-operator
Password:
User privilege role is network-operator, and only those commands that authorized to the
role can be used.
Related commands
authentication super
(
Security Command Reference
)
super authentication-mode
super password
super authentication-mode
Use
super authentication-mode
to set an authentication mode for temporary user role
authorization.
Use
undo super authentication-mode
to restore the default.
Summary of Contents for SOHO IE4300
