3
15 2
Table 1 Command output
Field
Description
Format selector
Format selector of the MST region, which is 0 (not configurable).
Region name
MST region name.
Revision level
Revision level of the MST region.
Instance VLANs Mapped
VLAN-to-instance mappings in the MST region.
Related commands
active region-configuration
instance
region-name
revision-level
vlan-mapping modulo
display stp
Use
display stp
to display spanning tree status and statistics.
Syntax
display stp
[
instance instance-list
|
vlan
vlan-id-list
]
[
interface
interface-list
|
slot
slot-number
]
[
brief
]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
instance instance-list
: Specifies a space-separated list of up to 10 MSTI items. Each item
specifies an MSTI or a range of MSTIs in the form of
instance-id1
[
to
instance-id2
]
. The
value for
instance-id2
must be equal to or greater than the value for
instance-id1
.
The
value range for the
instance-id
argument is 0 to 4094, and the value 0 represents the CIST.
vlan
vlan-id-list
: Specifies a space-separated list of up to 10 VLAN items. Each item
specifies a VLAN or a range of VLANs in the form of
vlan-id1
[
to
vlan-id2
]
. The value for
vlan-id2
must be equal to or greater than the value for
vlan-id1
. The value range for the
vlan-id
argument is 1 to 4094.
interface interface-list
: Specifies a space-separated list of up to 10 interface items. Each
item specifies an interface or a range of interfaces in the form of
interface-type
interface-number
1
[
to
interface-type interface-number 2
]
. The interface
number for
interface-number
2
must be equal to or greater than the interface number for
interface-number
1
.
brief
: Displays brief spanning tree status and statistics. If this keyword is not specified, the
command displays detailed spanning tree status and statistics.
Summary of Contents for SOHO IE4300
