7
Predefined user roles
network-admin
network-operator
Usage guidelines
This command displays the number of MAC address entries per type and the maximum number of
MAC address entries allowed for each type.
Examples
# Display MAC address table statistics.
<Sysname> display mac-address statistics
MAC Address Count:
Dynamic Unicast Address (Learned) Count: 3
Dynamic Unicast Address (Security-service-defined) Count: 4
Static Unicast Address (User-defined) Count: 0
Static Unicast Address (System-defined) Count: 3
Total Unicast MAC Addresses In Use: 10
Total Unicast MAC Addresses Available: 16384
Multicast and Multiport MAC Address Count: 1
Static Multicast and Multiport MAC Address (User-defined) Count: 1
Total Multicast and Multiport MAC Addresses Available: 256
Table 6 Command output
Field
Description
Dynamic Unicast Address (Learned) Count
Number of dynamic unicast MAC address entries
triggered by packets.
Dynamic Unicast Address
(Security-service-defined) Count
Number of dynamic unicast MAC address entries
triggered by the security service.
Static Unicast Address (User-defined) Count
Number of static unicast MAC address entries added
by users.
Static Unicast Address (System-defined) Count
Number of static unicast MAC address entries added
by the system.
Total Unicast MAC Addresses In Use
Number of unicast MAC address entries.
Total Unicast MAC Addresses Available
Maximum number of unicast MAC address entries
allowed.
Multicast and Multiport MAC Address Count
Number of multicast and multiport unicast MAC
address entries.
Static Multicast and Multiport MAC Address
(User-defined) Count
Number of static multicast and multiport unicast MAC
address entries added by users.
Total Multicast and Multiport MAC Addresses
Available
Maximum number of multicast and multiport unicast
MAC address entries allowed.
mac-address (interface view)
Use
mac-address
to add or modify a MAC address entry on an interface.
Use
undo mac-address
to delete a MAC address entry on an interface.
Summary of Contents for SOHO IE4300
