H3C SOHO IE4300, Command Reference Manual

Page: 3028 / 3296

10
Field Description
etherStatsOversizePkts
Total number of oversize packets received on the interface.
An oversize packet is a packet that exceeds the maximum frame length
(excluding framing bits but including FCS octets) specified by the
jumboframe enable command. For more information about the
jumboframe enable command, see Ethernet interfaces in Interface
Command Reference .
etherStatsFragments
Total number of undersize packets received with CRC errors on the
interface.
etherStatsJabbers Total number of oversize packets received with CRC errors on the interface.
etherStatsCRCAlignErrors Total number of packets received with CRC errors on the interface.
etherStatsCollisions Total number of colliding packets received on the interface.
etherStatsDropEvents
Total number of events in which packets were dropped.
NOTE:
This statistic is the number of times that a drop condition occurred. It is not
necessarily the total number of dropped packets.
Incoming packets by size:
Incoming-packet statistics by packet length:
•
64 —Number of packets with a length equal to 64 bytes.
•
65-127 —Number of 65- to 127-byte packets.
•
128-255 —Number of 128- to 255-byte packets.
•
256-511 —Number of 256- to 511-byte packets.
•
512-1023 —Number of 512- to 1023-byte packets.
•
1024-1518 —Number of 1024- to 1518-byte packets.
Related commands
rmon statistics
rmon alarm
Use
rmon alarm
to create an RMON alarm entry.
Use
undo rmon alarm
to remove an RMON alarm entry.
Syntax
rmon alarm entry-number alarm-variable sampling-interval { absolute |
delta } [ startup-alarm { falling | rising | rising-falling } ]
rising-threshold threshold-value1 event-entry1 falling-threshold
threshold-value2 event-entry2 [ owner text ]
undo rmon alarm entry-number
Default
No RMON alarm entries exist.
Views
System view
Predefined user roles
network-admin
Parameters
entry
-
number
: Specifies an alarm entry index in the range of 1 to 65535.