H3C SOHO IE4300, Command Reference Manual

Page: 3007 / 3296

39
Keyword Definition
coldstart
Notification sent when the device restarts.
linkdown
Notification sent when the link of a port goes down.
linkup
Notification sent when the link of a port comes up.
warmstart
Notification sent when the SNMP agent restarts.
system
: Specifies system notifications sent when the system time is modified, the system reboots,
or the main system software image is not available.
Usage guidelines
To report critical protocol events to an NMS, first enable the protocol and then enable SNMP
notifications for the protocol.
To use SNMP notifications in IPv6, enable SNMPv2c or SNMPv3.
For SNMP notifications to be sent correctly, you must also configure the notification sending
parameters as required.
If no optional parameters are specified, this command or its
undo
form enables or disables all SNMP
notifications supported by the device.
Examples
# Enable the SNMP agent to send SNMP authentication failure notifications.
<Sysname> system-view
[Sysname] snmp-agent trap enable standard authentication
Related commands
snmp-agent sys-info version
snmp-agent target-host
snmp-agent trap if-mib link extended
Use
snmp-agent trap if-mib link extended
to configure the SNMP agent to send
extended linkUp/linkDown notifications.
Use
undo snmp-agent trap if-mib link extended
to restore the default.
Syntax
snmp-agent trap if-mib link extended
undo snmp-agent trap if-mib link extended
Default
The SNMP agent sends standard linkUp/linkDown notifications.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Extended linkUp and linkDown notifications add interface description and interface type to the
standard linkUp/linkDown notifications for fast failure point identification.