H3C SOHO IE4300, Command Reference Manual

Page: 2875 / 3296

64
If you execute this command and the
reaction trigger probe-pass
command multiple times,
the most recent configuration takes effect.
Examples
# In ICMP template view, configure the probe result sending on a per-probe basis.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] reaction trigger per-probe
Related commands
reaction trigger probe-fail
reaction trigger probe-pass
reaction trigger probe-fail
Use
reaction trigger probe-fail
to set the number of consecutive probe failures to
determine an operation failure.
Use
undo reaction trigger probe-fail
to restore the default.
Syntax
reaction trigger probe-fail count
undo reaction trigger probe-fail
Default
The NQA client notifies the feature of the operation failure when the number of consecutive probe
failures reaches 3.
Views
Any NQA template view
Predefined user roles
network-admin
Parameters
count : Specifies the number of consecutive probe failures, in the range of 1 to 15.
Usage guidelines
If the number of consecutive probe failures is reached, the NQA client notifies the feature that uses
the NQA template of the operation failure.
If you execute this command and the reaction trigger per-probe command multiple times,
the most recent configuration takes effect.
Examples
# In HTTP template view, configure the NQA client to notify the feature of the operation failure when
the number of consecutive probe failures reaches 5.
<Sysname> system-view
[Sysname] nqa template http httptplt
[Sysname-nqatplt-http-httptplt] reaction trigger probe-fail 5
Related commands
reaction trigger per-probe
reaction trigger probe-pass