H3C SOHO IE4300, Command Reference Manual

Page: 2861 / 3296

50
Predefined user roles
network-admin
Parameters
timeout
: Specifies the timeout time in milliseconds. The value range is 10 to 3600000.
Examples
# Set the response timeout time to 100 milliseconds in the UDP jitter operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-timeout 100
probe timeout
Use
probe timeout
to set the probe timeout time.
Use
undo probe timeout
to restore the default.
Syntax
probe timeout timeout
undo probe timeout
Default
The timeout time of a probe is 3000 milliseconds.
Views
ICMP echo/TCP/UDP echo operation view
DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view
UDP tracert operation view
Any NQA template view
Predefined user roles
network-admin
Parameters
timeout
: Specifies the probe timeout time in milliseconds. The value range for this argument varies
as follows:
•
For FTP and HTTP operations, the value range is 10 to 86400000.
•
For DHCP, DNS, DLSw, ICMP echo, SNMP, TCP, UDP echo, and UDP tracert operations, the
value range is 10 to 3600000.
•
For FTP, HTTP, and HTTPS templates, the value range is 10 to 86400000.
•
For other types of NQA templates, the value range is 10 to 3600000.
Usage guidelines
If a probe does not complete within the period, the probe is timed out.
Examples
# Set the probe timeout time to 10000 milliseconds for the DHCP operation.
<Sysname> system-view
[Sysname] nqa entry admin test