46
Parameters
interface-type interface-number
: Specifies an interface by its type and number.
Usage guidelines
For successful operation, the specified output interface must be up.
If both the
next-hop
and
out interface
commands are configured for the ICMP echo operation,
the
out interface
command does not take effect.
Examples
# Specify VLAN-interface 1 as the output interface for probe packets in the UDP tracert operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-tracert
[Sysname-nqa-admin-test-udp-tracert] out interface vlan-interface 1
password
Use
password
to specify a password.
Use
undo password
to restore the default.
Syntax
password
{
cipher
|
simple
}
string
undo password
Default
No password is specified.
Views
FTP/HTTP operation view
FTP/HTTP/HTTPS/RADIUS template view
Predefined user roles
network-admin
Parameters
cipher
: Specifies a password in encrypted form.
simple
: Specifies a password in plaintext form. For security purposes, the password specified in
plaintext form will be stored in encrypted form.
string
: Specifies the password. The value of the argument varies as follows:
•
For FTP, HTTP, and HTTPS operations, the plaintext form of the password is a case-sensitive
string of 1 to 32 characters. The encrypted form of the password is a case-sensitive string of 1
to 73 characters.
•
For RADIUS templates, the plaintext form of the password is a case-sensitive string of 1 to 64
characters. The encrypted form of the password is a case-sensitive string of 1 to 117
characters.
Examples
# Set the FTP login password to
ftpuser
.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
Summary of Contents for SOHO IE4300
