32
Predefined user roles
network-admin
Parameters
filename
: Specifies the name of a file, a case-sensitive string of 1 to 200 characters that cannot
contain slashes (/).
Examples
# Specify
config.txt
as
the file to be transferred between the FTP server and the FTP client for the
FTP operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] filename config.txt
# In FTP template view, specify
config.txt
as
the file to be transferred between the FTP server and
the FTP client.
<Sysname> system-view
[Sysname] nqa template ftp ftptplt
[Sysname-nqatplt-ftp-ftptplt] filename config.txt
frequency
Use
frequency
to specify the interval at which the NQA operation repeats.
Use
undo frequency
to restore the default.
Syntax
frequency
interval
undo
frequency
Default
In NQA operation view, the interval between two consecutive voice or path jitter operations is 60000
milliseconds. The interval between two consecutive operations of other types is 0 milliseconds.
In NQA template view, the interval between two consecutive operations is 5000 milliseconds.
Views
ICMP echo/TCP/UDP echo operation view
DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view
UDP tracert operation view
ICMP jitter/path jitter/UDP jitter/voice operation view
Any NQA template view
Predefined user roles
network-admin
Parameters
interval
: Specifies the interval between two consecutive operations, in the range of 0 to
604800000 milliseconds. An interval of 0 milliseconds configures NQA to perform the operation only
once, and not to generate any statistics.
Summary of Contents for SOHO IE4300
