8
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] destination ipv6 1::1
# In ICMP template view, specify 1::1 as the destination IPv6 address for the operation.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] destination ipv6 1::1
destination port
Use
destination port
to configure the destination port number for the operation.
Use
undo destination port
to restore the default.
Syntax
destination
port port-number
undo
destination
port
Default
The destination port number is 33434 for the UDP tracert operation and 161 for the SNMP operation.
No destination port number is configured for other types of operations.
The destination port numbers for the operations that use the following NQA templates are:
•
53 for the DNS template.
•
1812 for the RADIUS template.
No destination port number is configured for other types of NQA templates.
Views
TCP/UDP echo operation view
UDP tracert operation view
UDP jitter/voice operation view
DNS/RADIUS/SSL/TCP/UDP template view
Predefined user roles
network-admin
Parameters
port-number
: Specifies the destination port number for the operation, in the range of 1 to 65535.
Examples
# Set the destination port number to 9000 for the UDP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] destination port 9000
# In TCP template view, set the destination port number to 9000 for the NQA operation.
<Sysname> system-view
[Sysname] nqa template tcp tcptplt
[Sysname-nqatplt-tcp-tcptplt] destination port 9000
Summary of Contents for SOHO IE4300
