6
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] description icmp-probe
# In ICMP template view, configure the description as
icmp-probe
for the NQA operation.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] description icmp-probe
destination host
Use
destination host
to configure the destination host name for the operation.
Use
undo destination host
to restore the default.
Syntax
destination
host
host-name
undo
destination
host
Default
No destination host name is configured for the operation.
Views
UDP tracert operation view
Predefined user roles
network-admin
Parameters
host-name
: Specifies the destination host name, a case-sensitive string of 1 to 254 characters.
The host name can contain letters, digits, hyphens (-), underscores (_), and dots (.), but consecutive
dots (.) are not allowed. If the host name is a series of dot-separated labels, each label can contain a
maximum of 63 characters.
Examples
# Specify
www.test.com
as the destination host name for the UDP tracert operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-tracert
[Sysname-nqa-admin-test-udp-tracert] destination host www.test.com
destination ip
Use
destination ip
to configure the destination IPv4 address for the operation.
Use
undo destination ip
to restore the default.
Syntax
destination
ip ip-address
undo
destination
ip
Default
No destination IPv4 address is configured for an operation.
Summary of Contents for SOHO IE4300
