H3C SOHO IE4300, Command Reference Manual

Page: 2802 / 3296

5
Table 1 Command output
Field Description
Ping 1.1.2.2 (1.1.2.2): 56 data
bytes, press CTRL_C to break
Test whether the device with IP address 1.1.2.2 is reachable. There
are 56 bytes in each ICMP echo request. Press
Ctrl+C to abort the
ping operation.
56 bytes from 1.1.2.2: icmp_seq=0
ttl=254 time=4.685 ms
Received ICMP echo replies from the device whose IP address is
1.1.2.2. If no echo reply is received within the timeout period, no
information is displayed.
•
bytes —Number of bytes in the ICMP echo reply.
•
icmp_seq —Packet sequence, used to determine whether a
segment is lost, disordered or repeated.
•
ttl —TTL value in the ICMP echo reply.
•
time —Response time.
RR:
Routers through which the ICMP echo request passed. They are
displayed in inversed order, which means the router with a smaller
distance to the destination is displayed first.
--- Ping statistics for 1.1.2.2 --- Statistics on data received and sent in the ping operation.
--- Ping statistics for 1.1.2.2 in VPN
instance vpn1 ---
Ping statistics for a device in a VPN instance.
5 packet(s) transmitted Number of ICMP echo requests sent.
5 packet(s) received Number of ICMP echo replies received.
0.0% packet loss Percentage of unacknowledged packets to the total packets sent.
round-trip min/avg/max/std-dev =
4.685/4.761/4.834/0.058 ms Minimum/average/maximum/standard deviation response time, in
milliseconds.
ping ipv6
Use
ping ipv6
to test the reachability of the destination IPv6 address and display IPv6 ping
statistics.
Syntax
ping ipv6 [ -a source-ipv6 | -c count | -i interface-type interface-number
| -m interval | -q | -s packet-size | -t timeout | -tc traffic-class | -v |
-vpn-instance vpn-instance-name ] * host
Views
Any view
Predefined user roles
network-admin
Parameters
-a source-ipv6
: Specifies an IPv6 address of the device as the source IP address of ICMP echo
requests. If this option is not specified, the source IPv6 address of ICMP echo requests is the IPv6
address of the outbound interface. See RFC 3484 for information about the address selection rule.
-c count : Specifies the number of ICMPv6 echo requests that are sent to the destination. The
value range is 1 to 4294967295, and the default is 5.
-i interface-type interface-number : Specifies the source interface for ICMPv6 echo
requests. This option must be specified when the destination address is a multicast address or a link